Skip to content

Product Review: Duron’s ‘Bone White’ Paint

by Laura on August 10th, 2009

As you may have gathered by now, I am in the process of moving at the end of August. This means that everything I’ve done to make this cube my own is now going ka-put as I pack everything away and return the apartment in the condition I found it in. Other than the actual packing itself, painting my pretty ‘Shakespeare Green’ living room walls to ‘Bone White’ is a huge task I have to complete. The boyfriend and I started last weekend, thinking ‘eh, if one can of paint painted the living room — one can of paint will paint it back!’ Wrong. Oh. So. Wrong.

Messy Can

Coverage
While my Glidden Shakespeare Green covered one large wall and another medium sized wall with ease, we were not as fortunate with the Duron brand. Because the green wasn’t super dark, I assumed I could forgo using a primer. But at the rate we’re going, it would’ve benefited me greatly to have used a primer and saved myself some time, money and stress. We have put two coats on most of the green, and there are still variations in the look of the paint, meaning it’s going to need a third coat. I just do not understand why a light wall color, covered with white paint, would need three coats. Two, I could handle — you know, cover those spots you missed, but three is just crazy, in my opinion.

Paint Job -- Second Coat

Quality
To be honest, I was surprised at the quality. Based on the price, I figured this had to be some good paint! But the latex paint dried too quickly and left the bottom of the pan a mess, so that when the rolled when through the paint, then to the wall, we ended up with wonderful little latex globs on the wall.. Talk about a pain!

Bad Paint Job

Yucky brush

Smell
It’s been a week since we painted the first two coats of paint. I’ve cooked, I’ve cleaned, I’ve had the balcony door open — the smell is just now starting to diminish a bit.

Price
I can handle bad paint — when it’s cheap. This stuff isn’t sold in Home Depot (at least, not around me) so I had to find a specific store in the industrial district that is mostly used by contractors. Their hours are inconvenient — I could not get a gallon during the week because they are only open from 9-5 and only on Saturday from 8-12. No Sundays. Which is why the walls still aren’t finished.. So what was the damage? $40. Fourty dollars for one gallon of white paint.

When it comes down to it, I give Duron Paint a 1 out of 5. It was inconvenient to locate a store, it had a high odor, and quality and coverage were poor.

I want to make a disclaimer that I am writing this review not out of disrespect for the Duron brand, but so that other’s might know what they are going into before painting a rental’s walls. Had I known it was going to cost me over $100, supplies included, to paint my walls back to white, I probably would have forgone the green paint in favor of other decorative accessories.

Have you had any products lately that you’ve been disappointed in? Have you had different results with Duron paint?

From → Product Review

2 Comments
  1. Oh yeah. Definitely need primer, especially if going over a color with something lighter. We’ve had good luck with Behr as a brand (Home Depot). They’ve been advertising a primer/paint blend in the same can. Very curious to see how well that actually works. And speaking of primer: if you decide to paint with a dark red, definitely use a dark primer. Red pigment is apparently transparent and if you forgo primer, you’re looking at at least 4 coats. :P

  2. Patricia–
    Yeah I didn’t think I would need primer, but I suppose I was wrong. 3 coats later, it’s as done as it’s getting done! And about the red — it’s in my top 3 least favorite colors, so no worries about that. I too am interested in trying out the primer/paint blend and may have to look into it once I move.

    Best,
    Laura

Leave a Reply

Note: XHTML is allowed. Your email address will never be published.

Subscribe to this comment feed via RSS